• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there are no objects (e.g. a utensil or a cloth) covering them. Even a thin film of water may make the controls difficult to operate.

Click here to watch video

• You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF key are disabled.

To lock the controls

1. Touch the lock 🔒 key. The timer indicator will show "Lo" (Lock).

To unlock the controls

1. Make sure the hob is turned on.

2. Touch and hold the lock 🔒 key for 5 seconds.

3. You can now start using your hob.

1. Touch the Start / Pause ⏯ key, all the heating zones will stop working and all the zone indicators will show "I I"

2. Touch the Start / Pause ⏯ key again, all the heating zones will revert to their original setting.

• The function is available when one or more heating zones are working.
• If you don't cancel the pause control within 30 minutes, the whole cooktop will automatically switch off.

Activating the keep warm function

1. Select the zone you wish to use (e.g. front left zone).

2. Touch the keep warm key, the zone indication will show " I "

• If you want to activate the keep warm function for one or more heating zones, you need to select one by one.

Cancelling the keep warm function

1. Touch the heating zone selection key.

2. Select a new heat setting by touching the "Slider" control, then the heating zone will revert to the level you select.

Or

Turn the cooktop off using the On/Off key.

Activating the boost function

1. Select the heating zone you wish to use (e.g. front left zone).

2. Touch the Boost "P" key and the power level indication will show "P".

Cancelling the boost function

1. Select the heating zone with the boost function activated.

2. Touch the Boost "P" key or "Slider" control to cancel the boost function, and select the level you want to set.

• The boost function will remain on for 5 minutes, after that the zone will set to level 9 automatically.

Unsure of what heat setting to cook your food on? Please click to view cooking recommendations

Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass)

• Switch the power to the cooktop off.
• Apply a cooktop cleaner while the glass is still warm (but not hot!)
• Rinse and wipe dry with a clean cloth or paper towel.
• Switch the power to the cooktop back on.

Boil overs, melts, and hot sugary spills on the glass

• Immediately remove the saucepan or pot and wipe the surface with some paper towel being careful not to scold your hand with any very hot spill, and then wipe over with a cloth rinsed in warm soapy water to assist in removing the spill. Repeat until all residue is removed before continuing to use the cooking zone.

Spillovers on the touch controls

• Switch the power to the cooktop off.
• Soak up the spill.
• Wipe the touch control area with a clean damp sponge or cloth.
• Wipe the area completely dry with a paper towel.
• Switch the power to the cooktop back on.

Induction hobs are quicker and more controllable than gas. The hob works by using a magnetic field to heat the pan rather than through the ceramic surface of the hob. The hob is extremely efficient as it heats pans to a high temperature very quickly, but offers greater safety as only the pan is heated and the ceramic induction cooktop (its not a plate) does not have an element in it and therefore is quick to cool down.