See below:

1. Whilst the rangehood is switched on and the motor is running, push the COUNTDOWN TIMER button. The display will show the number 9 and proceed to countdown to 0.
2. When the timer reaches 0, the motor and lights will turn off.

• To operate the lights, push the LIGHT button. To switch off, push the LIGHT button again.

The model number and serial number can be found under the filters.

1. Turn the rangehood on by pushing the POWER button.
2. To start the rangehood on its 1st speed, push the LOW SPEED button. An indicator light surrounding the button will illuminate. Push the LOW SPEED again to turn the motor off.
3. To operate the 2nd and 3rd speed of the rangehood, push either the MEDIUM SPEED or HIGH SPEED buttons
4. The rangehood can be switched off by pushing the POWER button once to firstly cease operation of the motor and then a second time to power down the unit.

The proper function of the rangehood requires regular maintenance operations. The anti-grease filters capture the grease particles suspended in the air, and are therefore subject to clogging according to the frequency of the use of the appliance. In order to prevent fire hazard, it is recommendable to clean the filter at a minimum of every 2 months by carrying out the following instructions:

• Remove the filters from the rangehood and wash them in a solution of water and liquid detergent, leaving to soak.
• Rinse thoroughly with warm water and leave to dry.
• The filters may also be washed in the dishwasher.

The aluminium panels may alter in colour after several washes. This is not cause for customer complaint nor replacement of panels. Clean the fan and other surfaces of the cooker hood regularly using a cloth moistened with denatured alcohol or non-abrasive liquid detergent. Keep motor and other parts free from water as this will cause damage to the appliance.